Produce Notches suitable either for assembly
or arc welding 90 joints in tubes and pipes. No
additional finishing operations required on the
tube. Production can exceed 300 notched ends per
hour.
Stationary die block supports tube to be notched.
Punch is fitted to a movable holder. Punch enters
inside end of tube. Actuation of the tool proceeds
to cut the tube from the inside out. Tube is rotated
manually through 180 degree for second notch.
Tool accepts interchangeable punch and die block.
Punch and die block are specific to tube diameter,
and wall thickness. Special shape punch and die
block for profiled, notched ends.
Tool is intended to be used in power press. Scrap
falls through the tool and through the press bolster.
This tool is not intended to produce leak proof
joints. |
